6,289 research outputs found
Use of a digital tone extractor for real-time phase analysis
A digital tone extractor which monitors the phase integrity of a VLBI recording system in real time was developed. The digital tone extractor monitors phase calibrator tones injected at the antenna and tracks their phase as a function of time. It is capable of maintaining 0.001 cycle phase accuracy over the course of a VLBI experiment in accordance with the accuracy requirements of centimeter VLBI work. This real time VLBI system monitor is a safeguard against most instrumental breakdowns and operator errors
Optical constants of uranium plasma Final report
Thermodynamic and optical properties of uranium plasma in proposed gaseous core nuclear rocket
A feasibility study: California Department of Forestry and Fire Protection utilization of infrared technologies for wildland fire suppression and management
NASA's JPL has completed a feasibility study using infrared technologies for wildland fire suppression and management. The study surveyed user needs, examined available technologies, matched the user needs with technologies, and defined an integrated infrared wildland fire mapping concept system configuration. System component trade-offs were presented for evaluation in the concept system configuration. The economic benefits of using infrared technologies in fire suppression and management were examined. Follow-on concept system configuration development and implementation were proposed
Monolithic microwave integrated circuit water vapor radiometer
A proof of concept Monolithic Microwave Integrated Circuit (MMIC) Water Vapor Radiometer (WVR) is under development at the Jet Propulsion Laboratory (JPL). WVR's are used to remotely sense water vapor and cloud liquid water in the atmosphere and are valuable for meteorological applications as well as for determination of signal path delays due to water vapor in the atmosphere. The high cost and large size of existing WVR instruments motivate the development of miniature MMIC WVR's, which have great potential for low cost mass production. The miniaturization of WVR components allows large scale deployment of WVR's for Earth environment and meteorological applications. Small WVR's can also result in improved thermal stability, resulting in improved calibration stability. Described here is the design and fabrication of a 31.4 GHz MMIC radiometer as one channel of a thermally stable WVR as a means of assessing MMIC technology feasibility
Coexistence of a triplet nodal order-parameter and a singlet order-parameter at the interfaces of ferromagnet-superconductor Co/CoO/In junctions
We present differential conductance measurements of Cobalt / Cobalt-Oxide /
Indium planar junctions, 500nm x 500nm in size. The junctions span a wide range
of barriers, from very low to a tunnel barrier. The characteristic conductance
of all the junctions show a V-shape structure at low bias instead of the
U-shape characteristic of a s-wave order parameter. The bias of the conductance
peaks is, for all junctions, larger than the gap of indium. Both properties
exclude pure s-wave pairing. The data is well fitted by a model that assumes
the coexistence of s-wave singlet and equal spin p-wave triplet fluids. We find
that the values of the s-wave and p-wave gaps follow the BCS temperature
dependance and that the amplitude of the s-wave fluid increases with the
barrier strength.Comment: 5 pages, Accepted to Phys. Rev.
Occupational exposure to crystalline silica and autoimmune disease.
Occupational exposure to silica dust has been examined as a possible risk factor with respect to several systemic autoimmune diseases, including scleroderma, rheumatoid arthritis, systemic lupus erythematosus, and some of the small vessel vasculitidies with renal involvement (e.g., Wegener granulomatosis). Crystalline silica, or quartz, is an abundant mineral found in sand, rock, and soil. High-level exposure to respirable silica dust can cause chronic inflammation and fibrosis in the lung and other organs. Studies of specific occupational groups with high-level silica exposure (e.g., miners) have shown increased rates of autoimmune diseases compared to the expected rates in the general population. However, some clinic- and population-based studies have not demonstrated an association between silica exposure and risk of autoimmune diseases. This lack of effect may be due to the limited statistical power of these studies to examine this association or because the lower- or moderate-level exposures that may be more common in the general population were not considered. Experimental studies demonstrate that silica can act as an adjuvant to nonspecifically enhance the immune response. This is one mechanism by which silica might be involved in the development of autoimmune diseases. Given that several different autoimmune diseases may be associated with silica dust exposure, silica dust may act to promote or accelerate disease development, requiring some other factor to break immune tolerance or initiate autoimmunity. The specific manifestation of this effect may depend on underlying differences in genetic susceptibility or other environmental exposures
Angular dependence of the magnetization of isotropic superconductors: which is the vortex direction?
We present studies of the dc magnetization of thin platelike samples of the
isotropic type II superconductor PbTl(10%), as a function of the angle between
the normal to the sample and the applied magnetic field . We determine
the magnetization vector by measuring the components both parallel
and normal to in a SQUID magnetometer, and we further decompose it in
its reversible and irreversible contributions. The behavior of the reversible
magnetization is well understood in terms of minimization of the free energy
taking into account geometrical effects. In the mixed state at low fields, the
dominant effect is the line energy gained by shortening the vortices, thus the
flux lines are almost normal to the sample surface. Due to the geometrical
constrain, the irreversible magnetization remains locked to the
sample normal over a wide range of fields and orientations, as already known.
We show that in order to undestand the angle and field dependence of the
modulus of , which is a measure of the vortex pinning, and to
correctly extract the field dependent critical current density, the knowledge
of the modulus and orientation of the induction field is required.Comment: 11 pages, 6 figure
Enhancing the Performance of the T-Peel Test for Thin and Flexible Adhered Laminates
Symmetrically bonded thin and flexible T-peel specimens, when tested on
vertical travel machines, can be subject to significant gravitational loading;
with the associated asymmetry and mixed-mode failure during peeling. This can
cause erroneously high experimental peel forces to be recorded which leads to
uncertainty in estimating interfacial fracture toughness and failure mode. To
overcome these issues, a mechanical test fixture has been designed for use with
vertical test machines, that supports the unpeeled portion of the test specimen
and suppresses parasitic loads due to gravity from affecting the peel test. The
mechanism, driven by the test machine cross-head, moves at one-half of the
velocity of the cross-head such that the unpeeled portion always lies in the
plane of the instantaneous center of motion. Several specimens such as bonded
polymeric films, laminates, and commercial tapes were tested with and without
the fixture, and the importance of the proposed T-peel procedure has been
demonstrated
Tuning the Kondo effect with a mechanically controllable break junction
We study electron transport through C60 molecules in the Kondo regime using a
mechanically controllable break junction. By varying the electrode spacing, we
are able to change both the width and height of the Kondo resonance, indicating
modification of the Kondo temperature and the relative strength of coupling to
the two electrodes. The linear conductance as a function of T/T_K agrees with
the scaling function expected for the spin-1/2 Kondo problem. We are also able
to tune finite-bias Kondo features which appear at the energy of the first C60
intracage vibrational mode.Comment: 4 pages with 4 figure
- …